| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hot-Selling Blast Hole Drill Rigs KG726III for Coal Mine
The KG726III/KG726HIII down-the-hole drill rig for open use is an improved device in compliance with national regulations on environmental protection. Equipped with the Yuchai engine(China III), the drill rig meets nationally. standards for emissions and the environment. The tramming motor of plunger piston and four-wheel drive improve the working pressure and climbing capacity. The expanded pitch and lifting-arm hydraulic cylinder enable it to meet the requirements of limiting position use. Meanwhile, the hydraulic system is improved, thereby proving increased system flow and rotary speed. The hydraulic cylinder has been optimized, thus making it more reliable. The guide rail is installed in an inclined way, making operations and observations easier. The thickened profile is used for the housing, and the additional ring makes handing and lifting convenient.
The KG726HIII down-the-hole drill rig for open use is equipped with a dust collector, thus making the operation more environment-friendly and reliable.
-- Safe and stable travelling system
With a low gravity centre and big ground clearance, this drill machine can easily travel on bumpy roads. It is driven by a special wheel motor which brings strong grade-ability and a low failure rate.
-- Powerful and reliable engine
Adopt a famous 4-cylinder diesel engine as the driving force which has the advantages of large power, small volume, small vibration, and reliable operation.
| Technical Parameters | ||
| Model of drill rig | KG726III | KG726HIII |
| Weight of complete machine | 4200KG | 4400KG |
| Outer dimensions | 5600*2400*2300mm | 5600*2600*2300mm |
| Drilling hardness | f=6-20 | |
| Drilling diameter | Φ90-115mm | |
| Depth of economical drilling | 25m | |
| Rotary speed | 0-120rpm | |
| Rotary torque (Max) | 2000N.m(Max) | |
| Lifting force | 18KN | |
| Method of Feed | Oil cylinder+leaf chain | |
| Feed stroke | 3780mm | |
| Travelling speed | 0-2.5Km/h | |
| Climbing capacity | ≤30° | |
| Ground clearance | 350mm | |
| The tilt angle of the Beam | Down: 135°, up:50°, total: 185° | |
| Swing angle of the boom | Left: 100°,right:45°, total: 145° | |
| Pitch angle of drill boom | Down: 50°, up:25°, total: 75° | |
| Swing angle of drill boom | Left: 44°,right:45°, total: 89° | |
| Compensation length of the beam | 900mm | |
| Supporting power | Yuchai YCD4R23T8-80 (59KW / 2400r / min) | |
| DTH hammer | M30 | |
| Drilling rod | Φ64 * 3m | |
| Air consumption | 9-17m³/min | |
| Maximum height of the horizontal hole | 2750mm | |
| Minimum height of the horizontal hole | 350mm | |
- Powerful feed mechanism and rotating system
Optimally designed luffing mechanism and round drilling boom with the advantages of neoteric structure and easy maintenance greatly improves the drilling hole's coverage area. That also makes low-order horizontal hole drilling available.
This rotating system is composed of an orbit hydraulic motor and planetary gearbox.
That provides the crawler rock drill, a type of wagon drill, with strong torque reserve and reduces the sticking drilling rate.
Worldwide Factories Make After-Sale Worry-Free!
Q1: Are you a factory or trade company?
A1: We are a factory. And we have ourselves trading company.
Q2: What is the exact address of your factory?
A2: Our Company is located in JNo.9 Kaixuan Ave West, Economic Zone Quzhou, Zhejiang, China
Q3: How long is your air compressor machine warranty?
A3: One year for the whole machine and two years for the screw air end, except for consumable spare parts.
Q4: Will you provide some spare parts for the machines?
A4: Yes, of course.
05: What about the voltage of products? Can they be customized?
A5: Yes, of course. The voltage can be customized according to your requirement.
Q6: Which payment term can you accept?
A6: 30% T/T in advanced, 70% T/T against the B/L copy.
Q7: How long will you take to arrange production?
A7: 380V 50HZ we can deliver, the goods within 7-15 days. Other electricity or other colors we will delivery within 25-30 days.
Q8.What about the maintenance?
A8: First maintenance needs to be done after 500 hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.
Q9: Can you accept OEM orders?
A9: Yes, with a professional design team, OEM orders are highly welcome.
Q10: Which trade term can you accept?
A10: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.
){kind=link}